Untitled document




Other Equipment

Grouting equipment
  all holes can be grouted when required. Grouting can be accomplished through hollow stem augers, or in an open hole.

Pressure Washer
a mobile pressure washer for cleaning of augers and sampling equipment is available.

Support Truck
for transport of supplies.

C1150 Drill  mounted on a tandem truck. This unit uses hollow stem and solid core augers with standard penetration testing, split barrel sampling, and continuous laskey sampling to 200ft. With a 22 ft. drive stroke this truck provides higher productivity due to the ability to pull 20 ft. strings of augers at a time. This drill has 11,000 ft lbs. of torque, a retract force of 32,000 lbs. and a draw works travel of 22 feet.
Rig Image Rig Image Rig Image


C72 Drill  mounted on a three ton single axle truck.. This unit uses hollow stem and solid core augers with standard penetration testing and split barrel sampling to 80 ft. This drill also has the ability to drill angle holes. The C72 drill has 8,000 ft. lbs. of torque, a retract force of 32,000 lbs. and a draw works travel is 22 feet.

Rig Image

C72R rotary drill is capable of drilling as a wet or air rotary. The C72 has 8,000 ft lbs of torque and 32,000 lbs retract force and a 22 foot stroke. This drill is set up for wire line coring The C72R also is capable of drilling with a DTH hammer to advance casing in gravel.

Rig Image Rig Image Rig Image

B31 Drill  mounted on a 1 ton 4X4. This drill is primarily used for thin walled core barrel sampling, standard penetration testing, and dry augers to 30ft. The B31 drill has 3,300 ft. lbs. of torque, Low over all height enables drilling inside many buildings.
Retract force of 28,000 lbs. and a draw works travel of 5 feet.

Rig Image Rig Image

The C18 is designed for tight access locations, indoor drilling and soft ground conditions.
This unit can enter a building through a 30 inch wide doorway and requires only 92 inches of clearance to drill.
The C18 is mounted on tracks for soft soil conditions and minimal environmental impact.

Rig Image



Untitled document
 © 2010 Chilako Drilling Services Ltd. All rights reserved.